You can now sign up and subscribe to be notified when members articles are posted here. See the form below in this pane to sign up. Content from members will be posted here when it is received and you will receive an email when it is posted. News items and …
This tidbit was submitted by CRYA member and Registrar, Al Oliver of the Steveston RC Sailing Club. RC sailing enthusiasts across Canada are looking for ways to connect with the public and encourage participation in our sport. In January of 2025 this medal was awarded to approximately 2000 runners in …
This article was submitted by Kevin Goom of the Marine Modelers Montreal. For those that have some electronics DIY skills this would be an interesting project. A Modern and Versatile Race Start Timer
I am quite sure that all of you are aware that when you alter the setting of either the main or jib sheet, that because of the interaction of the two sails you are affecting both sails at the same time. I don’t believe, however, that most of you realize …
I have explained how to tune a rig when the conditions were the optimum for the rig, i.e. the boat was neither underpowered or overpowered.. Now, I will attempt to explain how to set up your boat for conditions which are not ideal. It is an interesting fact that the …
In the previous articles, we talked about how to select a rig and find the proper position for it to produce a boat which is heeling about 30-35 degrees, and carries slight weather helm with the proper sail trim. Now, I will try to explain how to achieve this Trim. …
The first thing that you need to do to tune your boat, now that you have selected your rig, is to determine the proper mast position. This is also the last thing you should do, after you have the boat all trimmed out. In other words, tuning is a circle. …
The first step – and one that precedes any talk of tuning a rig – is to select the correct rig. As a rough guide, the optimum rig for beating is the one which will produce an angle of heel of about 30 to 35 degrees. If the boat is …
